C Scope – SGA4 Signal Generator
The C.Scope SGA4 is an affordable Signal Generator designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including street lighting cables.The simultaneous dual-frequency 33kHz and 131kHz signal output of the Signal Generators is ideal for maximising the number of buried services that can be energised and then detected. The SGA4 Signal Generator can apply the dual frequency signal without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.
One Watt High/Low Power Output
Simultaneous 33+131kHz Signal
Pulsed or Continuous Output Signal
Three Signal Application Techniques: Direct Connection / Wraparound / Induction
No periodic Calibration required
In-built Accessory Tray
The C.Scope SGA4 is an affordable Signal Generator designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including street lighting cables.The simultaneous dual-frequency 33kHz and 131kHz signal output of the Signal Generators is ideal for maximising the number of buried services that can be energised and then detected. The SGA4 Signal Generator can apply the dual frequency signal without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.
One Watt High/Low Power Output
Simultaneous 33+131kHz Signal
Pulsed or Continuous Output Signal
Three Signal Application Techniques: Direct Connection / Wraparound / Induction
No periodic Calibration required
In-built Accessory Tray
The C.Scope SGA4 is an affordable Signal Generator designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including street lighting cables.The simultaneous dual-frequency 33kHz and 131kHz signal output of the Signal Generators is ideal for maximising the number of buried services that can be energised and then detected. The SGA4 Signal Generator can apply the dual frequency signal without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.
One Watt High/Low Power Output
Simultaneous 33+131kHz Signal
Pulsed or Continuous Output Signal
Three Signal Application Techniques: Direct Connection / Wraparound / Induction
No periodic Calibration required
In-built Accessory Tray